Foi analisado o comportamento físico da secagem estacionária com distribuição axial de ar, com utilização de um secador comercial, em comparação com protótipos para secagem de sementes de milho, em camada de 0,70m. A temperatura do ar de secagem foi de 47 ±3ºC, no secador comercial e de 40 ±1ºC, nos protótipos de secador. Foram considerados o tempo de operação, a posição das sementes na massa e o efeito na qualidade física. Para tanto, foram caracterizados o ar ambiente, o ar de secagem, as temperaturas e os teores de água na massa de sementes e realizados exame visual de fissuras internas e teste de coloração com tintura de iodo. Com baixa umidade relativa ocorre super secagem na camada inferior e retardamento na camada superior, resultando em gradientes de umidade das sementes, no final da secagem, de até 4,5 pontos percentuais. O aumento da temperatura do ar de secagem determina uma elevação na taxa de remoção de água e aumento da percentagem de sementes de milho com fissuras internas e quando a camada de sementes mais próxima da entrada do ar aquecido atinge teor de água inferior a 14%, se inicia a secagem da camada seguinte.
The present study analyzed the physical performance of the stationary dryer with axial air flow distribution, using a commercial dryer compared with prototypes. Corn seeds were used in a 0.70m layer. The temperature of the drying air was 47 +/-3ºC, in the commercial bean dryer and 40 +/-1ºC in the prototype dryer. The operation time, seed position in the mass and the effect on the physical quality were consideed. For this, the ambient and drying air temperatures and the seed moisture content were characterized, internal fissures were examined visually and coloration test with iodine dye was applied. It was concluded from the results that with low relative humidity lower there is over drying of the lower layer and a delay in drying the upper layer, resulting in seed moisture gradients, at the end of the drying process of more than 4.5 percentile points; the increase in the drying air temperature determined the rise in the water removal rate and increases in the percentage of corn seeds with internal fissures and that the second layer of seeds began to dry when the first layer reached moisture content lower than 14%.